Bubbler Level Measurement: How It Works & When to Use It
How bubbler (dip-tube) level measurement works, the hydrostatic math with a worked example, open vs closed-tank hookups, when to use it, and which transmitter to pick.
-
-
Boiler Drum Level Measurement: DP, Density & Shrink-Swell
How to measure boiler drum level with a DP transmitter: wet-leg setup, pressure-based density compensation worked at 45 bar(g), shrink and swell, and DP vs radar.
-
Well Water Level Sensor: How to Choose, Size & Install One
How to pick a well water level sensor: submersible pressure vs ultrasonic, sizing the range, and installing it for dry-run pump protection.
-
Hydrostatic Level Measurement: Submersible vs DP, Explained by Physics
Hydrostatic level measurement uses P=ρgh to read tank level. Learn the physics once, then jump to the right deep-dive — submersible probe or DP transmitter — for your tank.
-
Submersible Level Transmitter: The 6 Failure Modes That Destroy Accuracy (and the Field Fixes)
A submersible level transmitter lives or dies by how it handles six field stresses — lightning, vent-tube condensation, silt, cable damage, freeze, and chemical attack. Here is the variant-selection and diagnostic playbook our field team uses.
